PELCAS Sunless Spray Tan Machine HVLP Spray Tan Gun Spray Tanning Kits for Home Use


















































PELCAS self spray tan machine using HVLP technology evenly spray the spray tan solution on your body, bring a healthy shiny brown skin. This spray tanning kit protect your skin from UV rays to avoid skin cancer. PELCAS airbrush spray tan machine also has a fine and precise tanning solution flow control. It gives an outstanding 0-0.50ml of solution control proving that it was designed specifically with your professional needs in mind.
The benefit of PELCAS spray tan machine
[Effective spray&save solution] PELCAS sunless spray tanning kits use HVLP spray technology, high flow-low pressure, the spray paint rate of at least 65% is considered a reduction in solution waste. Compared with traditional 3.5bar airbrush gun, PELCAS airbrush spray tan machine maximum pressure at the air cap is 0.7bar/10psi.
[Nice light natural-looking spray tan] PELCAS spray tan machine adopts the airbrush method, spray the tan solution on your skin for a quick tanning effect.The micro-mist nozzle is removable for easy cleanup but more importantly does a pretty good job with misting the tanning solution unto your skin for a nice light natural-looking spray tan.
[Flexible hose for easy home use] PELCAS spray tanning kits with flexible hose is 2.5m/98.4inch long for an at-home scenario, it twists and locks onto the spray gun securely for optimal movement during tanning.
[Not too heavy tanning machine] PELCAS airbrush spray tan machine weights 6.94 pounds, the spray gun weights 0.86 pounds. In general, regardless of the type of spray gun machine you have and your body size, you will need approximately 0.125 pounds of tanning solution per full-body coverage. So you won’t feel too tired to hold our spray tanning gun to finish your tanning. Also, you can put your spray gun applicator on the cup holder of the blower.

How to use spray tan machine?
Basic Steps:
1. Attach hose to blower. Insert hose fitting into blower and turn clockwise until firm.
2. Attach Power cord. Connect it between power socket in blower and power jack on the
wall.
3. Fill with solution. Unscrew solution cup from spray gun applicator, fill with solution and
fit on.
4. Attach hose to spray gun applicator. Pull back the quick connector on the hose and
insert the hose connector at the back of the gun
5. Turn on by pressing the on/off button.
6. Pull the trigger to start spraying, release to cease.
Spray Effect Adjustment:
1. Shape of mist: Unscrew the nozzle bezel and set the nozzle cap tilted, horizontal or
vertical, then tighten the bezel. Refer the effects in nozzle cap setting of spray gun
applicator.
2. Solution flow control: Wind out solution dial(at the back of spray gun applicator, below
hose connector) to increase flow, wind in to decrease.
Notes:
1. Avoid over tightening hose into the blower in case its components crack.
2. You can dry your body by the air flow of the blower.
3. During tanning, make sure there is no craps, small debris, pieces of paper etc. under
the blower, in case the air inlet is blocked.
4. Air hose may be hot after working for a long time, do not touch the part close to the
blower.
PELCAS self spray tan machine guide
1. After tanning, please clean the solution cup, the tube and nozzle at once. Spray water or alcohol to clean the inside parts of the gun.
2. Clean the filter after tanning.
3. Do not keep the blower working continuously for more than 30min. For long time using, please switch it off every 30min.
4. Do not spill any liquid on the blower.
The specification of PELCAS spray tan machine
Outer box size: 54.5*40*47cm
Box weight: 13.5/12.5kgs
Product size: 36*26*23cm
Product weight: 3kg
Power: 400W
Voltage: 110V - 120V / 60Hz
American Electric Company
Nozzle: 0.5 mm; brass nozzle
Cups: 250cc
Hose: 2.5 M, with quick connector